Reclaimed Wood Siding - Old Barn Siding - Antique Planking

 

Reclaimed planking decking and siding is used in a wide variety of applications which include ceiling decking, interior wall paneling, and exterior siding. Like the timbers, the reclaimed lumber has been air dried over many years and, as a result, is dry and stable. Recycled planking decking and siding can be manufactured with a variety of milling options to suit the application. These options include tongue and groove, shiplap, edging (straightening), thickness planning (gauged thickness), and most other standard milling alternatives. All can be ordered in uniform width or in a mixed/random width for additional character.

Reclaimed planking, decking, and siding is sold in random length and random width unless you specify otherwise. While the specs for a product may include a range of widths and lengths in the description below, you may not receive the entire spectrum of widths and lengths as they are subject to availability. Please advise us of your requirements and any limitations in advance of placing and order so that we can advise on availability.

Following are the various reclaimed planking, decking and siding alternatives we offer arranged by species and the various appearances available. Please use the GET QUOTE form to receive a quote. It can be filled in to get a quote on individual boards such as shelves or by calculating the area being covered such as in a wall or ceiling.

Note: The base pricing for the products below is for quantities greater than 500 Board Feet. Quantities less than 500 BF are priced higher depending upon quantity. Wider widths may be priced higher as well. Gauging, Edging and Milling are available for an additional charge. You can approximate your cost by using the formula in the Get Quote Form to calculate the BF (board footage) required and multiplying by the base price next to the product you are interested in. For California residents, please add 8% sales tax. Note that shipping is not included.

 
RECLAIMED DOUGLAS FIR PLANKING  
 
AS IS DOUGLAS FIR
AS IS DOUGLAS FIR

AS IS DOUGLAS FIR - Recycled DF planking and decking is available in the condition it was received with the visible hardware removed and end damage trimmed. It is most commonly used in 1x and 2x thicknesses. All milling options are available with reclaimed planking. The 1" board stock is usually created by cutting 2" stock in half, leaving one original side and one freshly sawn side with a slight variation in width and thickness. This can be milled further to uniform width and thickness if necessary.

Thickness Widths Lengths Base Price
1" 4"-16" 2'-24' $4.95/BF
2" 4"-16" 2'-24' $3.70/BF
Sanding, Gauging & Milling Are Available At Additional Cost
AS IS DOUGLAS FIR
AS IS DOUGLAS FIR
 
 
SANDED DOUGLAS FIR
SANDED DOUGLAS FIR

SANDED DOUGLAS FIR - Sanded Reclaimed Douglas fir planking is created by passing the material through a special sander which lightly sands the surface while leaving the patina and character. It produces a more refined appearance and is very popular for open beam ceiling and wall applications.

Thickness Widths Lengths Base Price
1" 4"-16" 2'-24' $5.45/BF
2" 4"-16" 2'-24' $4.70/BF
Milling Is Available At Additional Cost
SANDED DOUGLAS FIR
SANDED DOUGLAS FIR
 
 
SAWN DOUGLAS FIR
SAWN DOUGLAS FIR

SAWN DOUGLAS FIR - With the horizontal bandsaw, we can produce a fresh sawn face on both sides of the planking. This will leave a limited amount of character marks from the nail holes, but generally it will look similar to fresh sawn fir with a band sawn finish. The material is typically the same net dimension in thickness and width. This material can also then be surface sanded or run to any of the common milling pattern such as tongue and groove.

Thickness Widths Lengths Base Price
1" 4"-16" 2'-24' $6.20/BF
2" 4"-16" 2'-24' $5.70/BF
Milling Is Available At Additional Cost
SAWN DOUGLAS FIR
SAWN DOUGLAS FIR
 
 
HAND HEWN DOUGLAS FIR
HAND HEWN DOUGLAS FIR

HAND HEWN DOUGLAS FIR - A hand hewn appearance on the planking is another alternative. Using adz axes and special sanders we can recreate a hand hewn surface which will match the hand hewn Douglas fir timbers. Occasional character marks will enhance the authentic character of this material. Note: This is shown with a finish. The product comes unfinished.

Thickness Widths Lengths Base Price
1" 4"-16" 2'-24' $6.95/BF
2" 4"-16" 2'-24' $5.70/BF
Sanding, Gauging & Milling Are Available At Additional Cost
HAND HEWN DOUGLAS FIR
HAND HEWN DOUGLAS FIR
 
 
EDGE CUT DOUGLAS FIR PANELING
EDGE CUT DOUGLAS FIR PANELING

EDGE CUT DOUGLAS FIR PANELING - Using various widths of edge cuts from the planks, you can create a very interesting wall treatment. The surface can be extremely irregular with some of the edges placed far enough out to create random shelves. Most often this is done using 2x material. Note that this material is supplied in individual pieces, not as panels.

Thickness Widths Lengths Base Price
1" 1"-2" 2'-12' $4.20/SF
Milling Is Available At Additional Cost
EDGE CUT DOUGLAS FIR PANELING
EDGE CUT DOUGLAS FIR PANELING
 
 
RECLAIMED DOUGLAS FIR +PLANKING  
 
SEMI SURFACED DOUGLAS FIR
SEMI SURFACED DOUGLAS FIR

SEMI SURFACED DOUGLAS FIR - Semi Surfaced Reclaimed Douglas fir planking is created by passing the material through a special drum sander which profoundly sands the surface while leaving remnants of the patina and character. It produces an even more refined appearance and smoother surface. It is very popular for open beam ceiling and wall applications.

Thickness Widths Lengths Base Price
1" 4"-16" 2'-24' $5.95/BF
2" 4"-16" 2'-24' $5.45/BF
Milling Is Available At Additional Cost
SEMI SURFACED DOUGLAS FIR
SEMI SURFACED DOUGLAS FIR
 
 
RECLAIMED BARN WOOD SIDING AND PLANKING  
 
AS IS GRAY BARN SIDING
AS IS GRAY BARN SIDING

AS IS GRAY BARN SIDING - Recycled barn siding is available in an as is condition with the visible hardware removed and end damage trimmed. It is most commonly available in an average 1" thickness and a variety of widths up to 10". It is available with both gray and brown patinas. All milling options are available with reclaimed barn siding including thickness gauging and edging. The original face will usually have a raised grain gray/brown patina with the circular or band sawn markings.

Thickness Widths Lengths Base Price
1" 4"-10" 2'-10' $6.85/BF
Sanding, Gauging & Milling Are Available At Additional Cost
AS IS GRAY BARN SIDING
AS IS GRAY BARN SIDING
 
 
AS IS BROWN BARN SIDING
AS IS BROWN BARN SIDING

AS IS BROWN BARN SIDING - Recycled brown barn siding is available in an as is condition with the visible hardware removed and end damage trimmed. It is most commonly available in an average 1" thickness and a variety of widths up to 10". Brown barn siding usually originates from the inside of the barn where it was not exposed to the elements. All milling options are available with reclaimed barn siding including thickness gauging and edging. The original face will usually have a raised grain gray/brown patina with the circular or band sawn markings.

Thickness Widths Lengths Base Price
1" 4"-10" 2'-10' $6.85/BF
Sanding, Gauging & Milling Are Available At Additional Cost
AS IS BROWN BARN SIDING
AS IS BROWN BARN SIDING
 
 
AS IS BARN BOARD
AS IS BARN BOARD

AS IS BARN BOARD - Recycled barn board is available in an as is condition with the visible hardware removed and end damage trimmed. It is most commonly available in an average 2-3 thickness and a variety of widths up to 10". It is available with both gray and brown patinas. All milling options are available with reclaimed barn board including sanding, thickness gauging and edging. The original face will usually have a raised grain gray/brown patina with the circular or band sawn markings.

Thickness Widths Lengths Base Price
2-3" 4"-10" 2'-12' $6.85/BF
Sanding, Gauging & Milling Are Available At Additional Cost
AS IS BARN BOARD
AS IS BARN BOARD
 
 
AS IS THRESHER BOARD
AS IS THRESHER BOARD

AS IS THRESHER BOARD - Reclaimed Thresher Board is available in an as is condition with the visible hardware removed and end damage trimmed. It is most commonly pine, poplar, or oak and available in an average 2" thickness and a variety of widths up to 12". It is available with both gray and brown patinas. All milling options are available with reclaimed Thresher Board including sanding, thickness gauging and edging. The original face will usually have a raised grain gray/brown patina with the circular or band sawn markings, and wear marks.

Thickness Widths Lengths Base Price
2" 10"-20" 5'-16' $10.30/BF
Sanding, Gauging & Milling Are Available At Additional Cost
AS IS THRESHER BOARD
AS IS THRESHER BOARD
 
 
SANDED BROWN BARN SIDING
SANDED BROWN BARN SIDING

SANDED BROWN BARN SIDING - Sanded reclaimed barn planking is created by passing the individual planks through a special sander which lightly sands the surface while leaving the patina and character. This process will reduce a predominately gray patina to a beautiful shade of brown. It produces a more refined appearance and is very popular for open beam ceiling and wall applications.

Thickness Widths Lengths Base Price
1" 4"-10" 4'-10' $7.35/BF
Milling Is Available At Additional Cost
SANDED BROWN BARN SIDING
SANDED BROWN BARN SIDING
 
 
SANDED GRAY BARN SIDING
SANDED GRAY BARN SIDING

SANDED GRAY BARN SIDING - Sanded reclaimed barn planking is created by passing the individual planks through a special sander which lightly sands the surface while leaving the patina and character. If you prefer gray over brown, a delicate sanding process will leave the gray patina while smoothing the surface, without exposing the original brown patina below the surface. It produces a more refined appearance than the As Is product and is very popular for open beam ceiling and wall applications.

Thickness Widths Lengths Base Price
1" 4"-10" 4'-10' $7.35/BF
Milling Is Available At Additional Cost
SANDED GRAY BARN SIDING
SANDED GRAY BARN SIDING
 
 
SEMI SURFACED BARN SIDING
SEMI SURFACED BARN SIDING

SEMI SURFACED BARN SIDING - Semi Surfaced Reclaimed Barn Siding planking is created by passing the material through a special drum sander which profoundly sands the surface while leaving only remnants of the patina and character. It produces an even more refined appearance and smoother surface. It is very popular for open beam ceiling and wall applications.

Thickness Widths Lengths Base Price
1" 4"-10" 4'-10' $8.60/BF
Milling Is Available At Additional Cost
SEMI SURFACED BARN SIDING
SEMI SURFACED BARN SIDING
 
 
PAINTED BARN SIDING
PAINTED BARN SIDING

PAINTED BARN SIDING - Painted recycled barn siding is available in an as is condition with the visible hardware removed and end damage trimmed. It is most commonly available in an average 1" thickness and a variety of widths up to 10". It is available with the original fading red paint. All milling options are available with reclaimed barn siding including thickness gauging and edging.

Thickness Widths Lengths Base Price
1" 4"-10" 4'-10' $6.85/BF
Sanding, Gauging & Milling Are Available At Additional Cost
PAINTED BARN SIDING
PAINTED BARN SIDING
 
 
SAWN BARN SIDING
SAWN BARN SIDING

SAWN BARN SIDING - Reclaimed sawn barn siding is created by sawing reclaimed barn boards into planks with the horizontal band saw. This produces a fresh sawn face on both sides of the barn wood planking. It will leave a limited amount of character marks from the nail holes, but generally it will look similar to fresh sawn oak with a band sawn finish. The material is typically the same net dimension in thickness and width. This material can also then be surface sanded or run to any of the common milling pattern such as tongue and groove.

Thickness Widths Lengths Base Price
1" 4"-10" 4'-10' $7.60/BF
2" $7.60/BF
Milling Is Available At Additional Cost
SAWN BARN SIDING
SAWN BARN SIDING
 
 
HAND HEWN FACE CUTS
HAND HEWN FACE CUTS

HAND HEWN FACE CUTS - As a by-product of our milling operation, we occasionally generate hand hewn face cuts when saw sizing the authentic hand hewn barn beams. They are generally about 1" thick and vary in width. These are usually used in wall/ceiling applications which call for a rustic hand hewn appearance. This product is subject to the availability of stock on hand.

Thickness Widths Lengths Base Price
1" 4"-10" 4'-10' $6.85/BF
2" $6.85/BF
Sanding, Gauging & Milling Are Available At Additional Cost
HAND HEWN FACE CUTS
HAND HEWN FACE CUTS
 
 
EDGE CUT BARN BOARD PANELING
EDGE CUT BARN BOARD PANELING

EDGE CUT BARN BOARD PANELING - Using various widths of edge cuts from the reclaimed barn wood planks, you can create a very interesting wall treatment. The surface can be extremely irregular with some of the edges placed far enough out to create random shelves. Most often this is done using 1x barn siding or with a mix of reclaimed barn wood edge sizes. Note that this material is supplied in individual pieces, not as panels.

Thickness Widths Lengths Base Price
1" 1"-3" 2'-10' $6.85/SF
Milling Is Available At Additional Cost
EDGE CUT BARN BOARD PANELING
EDGE CUT BARN BOARD PANELING
 
 
MIXED BARN SIDING
MIXED BARN SIDING

MIXED BARN SIDING - Mixed appearance recycled barn siding is available in an as is condition with the visible hardware removed and end damage trimmed. It is most commonly available in an average 1" thickness and a variety of widths up to 10". This product is the result of mixing the siding from different barns and can have gray, brown, painted red tones. It is usually a mix of hardwood, Douglas fir, and pine barn siding. All milling options are available with reclaimed barn siding including thickness gauging and edging.

Thickness Widths Lengths Base Price
1" 2"-10" 2'-10' $9.90/SF
Sanding, Gauging & Milling Are Available At Additional Cost
MIXED BARN SIDING
MIXED BARN SIDING
 
 
RECLAIMED REDWOOD PLANKING AND DECKING  
 
SANDED REDWOOD
SANDED REDWOOD

SANDED REDWOOD - Sanded Reclaimed Redwood planking is created by passing the material through a special sander which lightly sands the surface while leaving the patina and character. It produces a more refined appearance and is very popular for open beam ceiling and wall applications.

Thickness Widths Lengths Base Price
1" 4"-16" 2'-24' Call for Price
2" 4"-16" 2'-24' Call for Price
Milling Is Available At Additional Cost
SANDED REDWOOD
SANDED REDWOOD
 
 
SAWN REDWOOD
SAWN REDWOOD

SAWN REDWOOD - With the horizontal band saw, we can produce a fresh sawn face on both sides of the planking. This will leave a limited amount of character marks from the nail holes, but generally it will look similar to fresh sawn Redwood with a band sawn finish. The material is typically the same net dimension in thickness and width. This material can also then be surface sanded or run to any of the common milling pattern such as tongue and groove.

Thickness Widths Lengths Base Price
1" 4"-16" 2'-24' Call for Price
2" 4"-16" 2'-24' Call for Price
Milling Is Available At Additional Cost
SAWN REDWOOD
SAWN REDWOOD
 
 
RECLAIMED GRAY BOARD PLANKING  
 
AS IS GRAY BOARD
AS IS GRAY BOARD

AS IS GRAY BOARD - This is another reclaimed wood product recovered straight off the farm. Typically, it has been outdoors for an extended period and has the resulting weathered gray patina with profound checking. It is usually a mix of Douglas Fir, Larch. and Pine. It is available in 2x6 through 2x12 and can be split to yield 1x with one old gray face. This decking is usually used in conjunction with the reclaimed barn beams to create a rustic theme.

Thickness Widths Lengths Base Price
1" 6"-12" 2'-16' $6.55/BF
2" 6"-12" 2'-16' $5.30/BF
Sanding, Gauging & Milling Are Available At Additional Cost
AS IS GRAY BOARD
AS IS GRAY BOARD
 
 
SANDED GRAY BOARD
SANDED GRAY BOARD

SANDED GRAY BOARD - Sanded reclaimed gray board is created by passing the individual planks through a special sander which lightly sands the surface while leaving the patina and character. This process will reduce a predominately gray patina to a gray/brown tone. It produces a more refined appearance and is very popular for open beam ceiling and wall applications.

Thickness Widths Lengths Base Price
1" 6"-12" 2'-16' $7.05/BF
2" 6"-12" 2'-16' $6.30/BF
Milling Is Available At Additional Cost
SANDED GRAY BOARD
SANDED GRAY BOARD
 
 
WASHED GRAY BOARD
WASHED GRAY BOARD

WASHED GRAY BOARD - Washed reclaimed gray board is created by passing the individual planks through a special washer which raises the grain while leaving the patina and character. This process will reduce a predominately gray patina to a gray/brown tone with raised grain. It produces a more rustic weathered appearance and is very popular for open beam ceiling and wall applications.

Thickness Widths Lengths Base Price
1" 6"-12" 2'-16' $7.55/BF
2" 6"-12" 2'-16' $7.30/BF
Sanding, Gauging & Milling Are Available At Additional Cost
WASHED GRAY BOARD
WASHED GRAY BOARD
 
 
RECLAIMED TEAK SIDING & PANELING SIDING  
 
"CLAPBOARD"

"CLAPBOARD" - "Clapboard" Teak siding originates from antique buildings in Indonesia and was used as siding on these buildings some dating back to the 1800s. Once reclaimed, the siding is lightly wire brushed leaving most of the beautiful patina characteristic of antique teak. Reclaimed Teak siding is installed in individual pieces and has a very slight shiplap pattern. On interior surfaces it is usually installed on plywood painted black to hide any voids. On exterior applications it is usually installed on furring strips placed on a waterproof membrane at 8 on center.

Thickness Widths Lengths Base Price
1/4"-1/2" Approx. 3"-8" 2'-7' $9.00/BF
"CLAPBOARD"
 
 
CHEVRON PATINA PANELS
CHEVRON PATINA PANELS

CHEVRON PATINA PANELS - Teak chevron patina paneling consists of the teak siding above which has been applied to a 4x8 platform in a chevron pattern which makes paneling installations easier. It can also be used in many millwork projects such as cabinet and door fabrication. The chevron pattern also makes an interesting border in many flooring installations.

Thickness Widths Lengths Base Price
3/4" 4'x8' sheet $512.00/each
1/2" 4'x8' sheet $409.60/each
CHEVRON PATINA PANELS
CHEVRON PATINA PANELS
 
 
"BALI" PANELS

"BALI" PANELS - This "Bali" teak paneling product consists of the teak siding which has been applied to a 4x8 platform to make paneling installations easier. It can also be used in many millwork projects such as cabinet and door fabrication. It has a very rustic, uneven appearance.

Thickness Widths Lengths Base Price
3/4" 4'x8' sheet $486.40/each
1/2" 4'x8' sheet $377.60/each
"BALI" PANELS
 
 
SMOOTH PANELS
SMOOTH PANELS

SMOOTH PANELS - Smooth teak paneling consists of surfaced teak lumber which has been applied to a 4x8 platform to make paneling installations easier. It can also be used in many millwork projects such as cabinet and door fabrication.

Thickness Widths Lengths Base Price
3/4" 4'x8' sheet $486.40/each
1/2" 4'x8' sheet $377.60/each
SMOOTH PANELS
SMOOTH PANELS
 
 
FINGERJOINT WIREBRUSHED OR SMOOTH PANELS
FINGERJOINT WIREBRUSHED OR SMOOTH PANELS

FINGERJOINT WIREBRUSHED OR SMOOTH PANELS - Fingerjoint teak patina paneling consists of surfaced teak lumber which has been applied to a 4x8 platform to make paneling installations easier. It can also be used in many millwork projects such as cabinet and door fabrication. Both patterns are available in either wire brushed or smooth surface appearance.

Thickness Widths Lengths Base Price
3/4" 4'x8' sheet $454.40/each
1/2" 4'x8' sheet $345.60/each
FINGERJOINT WIREBRUSHED OR SMOOTH PANELS
FINGERJOINT WIREBRUSHED OR SMOOTH PANELS
 
 
"SHIPLAP"

"SHIPLAP" - Teak smooth "Shiplap" siding originates from antique buildings in Indonesia and was used as structural joist and beams. The lumber is cut into blanks and run through a molder to create the shiplap pattern. This is a solid product and has a smooth surface. It is typically used as an exterior siding.

Thickness Widths Lengths Base Price
3/4" 5-1/4" 4'-9' $19.28/LF
"SHIPLAP"
 
 
"PANGA"

"PANGA" - "Panga" shiplap teak paneling originates from antique buildings in Indonesia and was used as siding on these buildings some dating back to the 1800s. Once reclaimed, the siding is lightly sanded leaving most of the beautiful patina characteristic of antique teak. Additionally, some of the individual pieces which make up the paneling will still have the original paint on them. The paneling nets thick x 8-1/2 wide and has a shiplap joint. It requires a solid backing for installation.

Thickness Widths Lengths Base Price
1/4" 8-1/2" 87" $9.00/SF
"PANGA"
 


 
 
Ph: (951) 695-1003 ~ Fx: (951) 695-9003
Copyright 1996 -   Vintage Timberworks Inc. All rights reserved.